What makes two VIE4015T proposals comparable?
Use the same tube and sheet requirements and drawing revisions, then compare the selected power and components. Identify any changed application detail separately.
Tube And Sheet Laser Cutting Machine
VIE4015T — VIE-T Laser Cutting Machine
VIE4015T tube application configuration is easier to review when each quotation uses the same tube drawing and the same sheet-work requirement. Keep a revision reference for that combined brief. A change to one part should be visible instead of silently altering the basis used to compare equipment offers.
VIE4015T belongs to the VIE-T tube and sheet range. Its published Cutting Area is 4000*1500mm, with a 1500-20000W power range. The area provides a sheet-format reference; it does not establish a maximum tube diameter or loading length for the project.
Technical specifications
| Specification | VIE4015T |
|---|---|
| Cutting Area | 4000*1500mm |
| Laser Head | Raytools, WSX, BOCI, Osprey |
| Laser Power | 1500-20000W |
| Laser Generator | Raycus, MAX, IPG |
| Control System | CypCut, Weihong |
| Servo Motor And Driver | Fuji, Delta, Yaskawa |
| Guide Rails | Taiwan Linear Rails |
| Reducer | Japan Shinbo, France Mortori |
| Max. Acceleration | 1.3G |
| Z Axis Travel | 300mm |
| Positioning Accuracy | 0.05mm |
| Repositioning Accuracy | 0.03mm |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIE4015T tube project brief and drawing revisions
A VIE4015T tube project brief should identify the section shape, dimensions, wall thickness, material and incoming length, then link those details to the finished-part drawing. Give the quantity and revision so a supplier can respond to a specific job rather than an old file or a general section description.
The sheet list should carry its own stock dimensions, material, thickness and drawings. VIE4020T lists 4000*2000mm compared with VIE4015T's 4000*1500mm. This keeps the first area entry unchanged while comparing the second. Use the difference only for the sheet requirement it describes.
The VIE4015T column lists 1.3G maximum acceleration and 300mm Z axis travel, with Positioning Accuracy of 0.05mm and Repositioning Accuracy of 0.03mm. Record those labels separately from finished-part tolerances. They do not supply cutting time or a validated dimensional outcome for either drawing group.
VIE4015T machine options on a consistent basis
VIE4015T machine options can be compared only after the application changes are made clear. If a tube section was revised, show the new dimensions and drawing reference. If only the sheet stock changed, retain the existing tube record so the two proposals are not answering different unstated questions.
Ask for an explicit response to the intended tube arrangement. The published 4000*1500mm sheet area does not fill in tube-section or stock-loading limits. Keep those questions on the brief until the proposal addresses them against the actual workpiece description.
Separate confirmed jobs from future additions. A prospective tube component may need more information before it becomes part of the equipment requirement. Identify that uncertainty so a model or component selection is not presented as proof that every future job has already been reviewed.
VIE4015T quotation requirements for comparable offers
VIE4015T quotation requirements include a chosen power rating and named components. Raytools, WSX, BOCI and Osprey are the listed head alternatives; Raycus, MAX and IPG are generators; and CypCut and Weihong are controls. The offer should resolve these alternatives into one proposed equipment combination.
The table names Fuji, Delta and Yaskawa drives, Taiwan Linear Rails, and Japan Shinbo or France Mortori reducers. Compare the actual selections rather than the mere presence of all names in a specification. A component revision should be distinguishable from a drawing or stock revision.
Include the destination and request the overall equipment and installation information needed for the proposed arrangement. Cutting Area is not a complete machine footprint. The series and comparison-model links support the area review; the contact page can carry the current brief and remaining questions.
Product questions
How does VIE4020T differ in the area table?
VIE4020T lists 4000*2000mm while VIE4015T lists 4000*1500mm. The second sheet-area dimension changes.
Can 4000mm be treated as tube loading length?
The source value is part of Cutting Area. Supply the actual tube length and section, and ask for the proposed arrangement to be confirmed.
What should a changed tube drawing include?
Give the new revision, section dimensions, wall thickness, material and required features, with the stock description and quantity still attached.
Are all listed component brands included?
They are alternatives. Ask the proposal to name the selected head, source, controls, drives and power for the actual equipment being offered.
Related equipment and information
Compare VIE-T Laser Cutting Machine models
Ready to discuss VIE4015T?
Share your material, dimensions and process. Start a conversation about the right configuration.