VIF4015T — VIF-T Laser Cutting Machine

A VIF4015T tube project brief needs a stable reference for each part: drawing number, revision, material, section shape, outside dimensions and wall thickness. Include incoming length and quantity. If a supplier is responding to a different revision, identify that difference before comparing its equipment selection with another offer.

Attach sheet-stock dimensions and drawings separately. VIF4020T is listed at 4000*2000mm, while VIF4015T is 4000*1500mm. The unchanged first dimension does not make the two area entries interchangeable: the second dimension may be the reason to discuss the comparison at all.

The VIF4015T motion entries are 0.8G maximum acceleration, 70m/min Max. Linkage Speed and 100mm Z axis travel. Positioning Accuracy is 0.05mm and Repositioning Accuracy is 0.03mm. These are equipment parameters, not a quoted material cutting speed or an acceptance result for your submitted drawings.

VIF4015T machine options should be compared on the same application basis. If a tube drawing is revised while a quotation is being prepared, state which features changed. Retain the previous reference for comparison, but make the current requirement unmistakable so an older drawing does not silently define the offer.

Apply the same discipline to stock changes. A different wall thickness, material or incoming length is a project change to discuss, even if the outside section appears similar. Ask the proposal to address the revised tube requirement; the sheet-area row cannot establish that answer.

For sheet work, distinguish a changed stock format from a changed finished-part drawing. Both may matter to the inquiry, but they are different facts. Keeping them separate lets the proposal identify what was considered without suggesting that the equipment has been tested on every submitted revision.

VIF4015T quotation requirements should state the selected rating within the 1500-3000W range. List the chosen Raytools or WSX head and Raycus, MAX or IPG generator. The available control names in the source table are CypCut, Golden Orange and Weihong; identify the control actually offered.

The same comparison should name the selected Luoyuan, Fuji or Delta drives. The table lists Taiwan Linear Rails and Japan Shinbo or France Mortori reducers. If a component changes between offers, label that change separately from any drawing revision so a price difference is not attributed to the wrong item.

Ask for the proposed equipment dimensions, installation information and supplied-item scope, and provide the destination. Cutting Area does not answer those layout questions. The series and comparison-model links support the published parameter review; send the current application documents through the contact page for a specific discussion.