What should change in the brief after a drawing revision?
Identify the new drawing and changed features, and include the current material, section dimensions, wall thickness, stock length and quantity.
Tube Laser Cutting Machine
VIT-F52 — VIT-F Laser Cutting Machine
VIT-F52 tube application configuration should remain tied to the current stock and drawing revision while equipment offers are compared. Record a changed section, material or finished feature explicitly. A proposal prepared for an older description should not silently become the answer to a different tube job.
The VIT-F52 entry lists Working Area as 12000*520mm, laser power as 12-20kW and control as FSCUT. It belongs to the VIT-F tube laser cutting range. Keep the original area label when recording the model, and ask for the actual section and incoming-stock requirements to be addressed.
Technical specifications
| Specification | VIT-F52 |
|---|---|
| Working Area | 12000*520mm |
| Positioning Accuracy | ±0.05 mm |
| Repositioning Accuracy | ±0.02 mm |
| Max Moving Speed | 100 m/min |
| Laser Source | Max/IPG |
| Laser Power | 12-20kw |
| Control System | FSCUT |
| Machine Size | 11800*2280*2600mm |
| Product Weight | 5000-20000kg |
| Max Acceleration | 0.6-1.2G |
| Voltage | 220V 1P 50HZ /380V 3P 50HZ |
Configuration options vary by model. Confirm the final specification, selected components and operating requirements with your quotation.
Other models in this series
VIT-F52 tube project brief for the current revision
The VIT-F52 tube project brief should identify drawing number, revision, section shape, dimensions, wall thickness, material and incoming length. Include quantity and explain what changed since an earlier inquiry. This gives a supplier a complete current application record instead of several messages that have to be reconciled.
VIT-F85 has a Working Area entry of 12000*850mm compared with 12000*520mm for VIT-F52. It is a difference in a published field, not confirmation of a particular tube diameter or loading arrangement. Retain the actual section description beside the model comparison.
Positioning Accuracy is listed as ±0.05mm and Repositioning Accuracy as ±0.02mm. Max Moving Speed is 100m/min, with 0.6-1.2G Max Acceleration. These labels should remain intact in the comparison. They do not provide a cutting cycle or establish that a revised part drawing meets its dimensional requirements.
VIT-F52 machine options when the application changes
VIT-F52 machine options should be compared on one current application basis. If only the finished features changed, preserve the unchanged stock information. If the stock length or wall thickness changed as well, identify that difference and request a response to the revised requirement rather than assuming the earlier arrangement remains suitable.
Keep handling and installation changes separate from drawing changes. Explain how the stock is intended to be presented and which responsibilities remain open. A machine selection should not be treated as evidence that a particular loading system, removal arrangement or complete line is included.
The table lists Machine Size as 11800*2280*2600mm and Product Weight as 5000-20000kg. When an offered configuration is revised, request its exact layout and equipment weight. Do not use the broad Product Weight range as a permissible tube payload or as the final installation figure for every configuration.
VIT-F52 quotation requirements for a comparable offer
VIT-F52 quotation requirements should state the chosen rating within the 12-20kW range and identify Max or IPG as the selected source. FSCUT is the listed control. Record component and rating changes separately from changes to the drawing set so the differences between proposals remain understandable.
The published voltage alternatives are 220V 1P 50HZ and 380V 3P 50HZ. Give the actual destination supply and confirm the offered electrical arrangement. A row listing both alternatives does not mean that the equipment automatically accepts both, or that installation requirements remain identical after a configuration change.
Ask the current offer to identify supplied items, layout information and outstanding application or installation questions. Keep it with the current stock and drawing records. The series and adjacent-model links provide parameter context; use the contact page to submit the consolidated revision for a specific response.
Product questions
What does comparison with VIT-F85 show?
Its Working Area is 12000*850mm rather than 12000*520mm. Ask how the original field applies to the actual section instead of assuming a universal diameter limit.
Can 100m/min be used as the production cutting rate?
It is listed as Max Moving Speed. It does not provide a material cutting speed or the cycle time of a submitted part.
Which weight should be used for the final proposal?
Request the exact equipment weight for the offered configuration. The published 5000-20000kg Product Weight range is not a stock payload.
How should the electrical choice be confirmed?
State the destination supply and ask which listed voltage configuration is offered, without assuming automatic compatibility with both alternatives.
Related equipment and information
Compare VIT-F Laser Cutting Machine models
Ready to discuss VIT-F52?
Share your material, dimensions and process. Start a conversation about the right configuration.